Horizontal boring mills since 1981, big selection!

Horizontal Boring Mills Used
Horizontal Boring Mills Reconditioned
Constantly Changing Inventory

by Tom Hale Equipment Company, Inc.
Since 1981
931-250-6181
Contact Us Now
Machines featured below are not the only ones available.
Scroll on down!



 
4 Inch
Wotan Model B100S
Horizontal Boring Mill
Wotan Horiz. Boring Mill Model B100S New 1975 4 Inch Spindle 55 X 43 Rotary Table 59 Inches of Cross Travel 49 Inches of Vertical Travel 50 Taper Spindle 1600 Max RPMs Some Tooling $49,500.00
Contact us on this one



 
3 Inch
Wotan Model B75
Horizontal Boring Mill
Wotan Horiz. Boring Mill Model B75 3 Inch Spindle 39 X 31 Rotary Table 45 Inches of Cross Travel 45 Inches of Saddle Travel 48 Inches of Vertical Travel Built In Out Riggers Threading $29,500.00
Contact us on this one



 
4 Inch
Wotan Model B105S
Horizontal Boring Mill
Wotan Horiz. Boring Mill Model B105S New in 1975 4 Inch Spindle 55 X 43 Rotary Table 72 Inches of Cross Travel 49 Inches of Vertical Travel 1000 Max RPMs 50 Taper Spindle 3 Axis Digital Read Out $49,500.00
Contact us on this one



 
5 Inch
G&L Model 350T
Horizontal Boring Mill
G&L Horiz. Boring Mill Model 350T 5 Inch Diameter Spindle 96 X 48 Table 84 Inches of Cross Travel 60 Inches of Vertical Travel 375 Main Spindle RPMs 1500 Aux. Spindle RPMs 230/460 Volt electrics $49,500.00
Contact us on this one



 
6 Inch
G&L Model 65-H6-T
Horizontal Boring Mill
G&L Horiz. Boring Mill Model 65-H6-T New 1963 6 Inch Spindle 60 X 122 Table 108 Inches of Cross travel 66 Inches of Saddle Travel 72 Inches of Vertical Travel 50 Taper Spindle Three Way Column Design $129,500.00
Contact us on this one



 
4 Inch
G&L Model 65-D4-T
Horizontal Boring Mill
G&L Horiz. Boring Mill Model 65-D4-T New 1964 4 Inch Diameter Spindle 48 X 96 Table 84 Inches of Cross Travel 60 Inches of Vertical Travel 1300 Max Spindle RPMs Hardened Ways $59,500.00
Contact us on this one



 
5 Inch
G&L Model 70A-D5-T
Horizontal Boring Mill
G&L Horiz. Boring Mill Model 70A-D5-T New in 1965 5 Inch Spindle 134 X 60 Table 120 Inches of Cross Travel 48 Inches of Saddle Travel 72 Inches of Vertical Travel 50 Taper Spindle Power Draw $99,500.00
Contact us on this one



 
4 Inch
G&L Model 340T
Horizontal Boring Mill
G&L Horiz. Boring Mill Model 340T New in 1956 4 Inch Spindle 36 X 74 Table 60 Inches of Cross Travel 54 Inches of saddle Travel 48 Inches of vertical Travel 50 Taper 1800 RPM Spindle Hardened Ways $49,500.00 Loaded
Contact us on this one



 
4 Inch
G&L Model 340T
Horizontal Boring Mill
G&L Horiz. Boring Mill Model 340T New 1954 4 Inch Spindle 74 X 36 Table 60 Inches of Cross Travel 48 Inches of Saddle Travel 60 Inches of Vertical Travel 1300 RPM Spindle Threading Tail Stock $39,500.00
Contact us on this one



 
5 Inch
G&L Model 70-D5-T
Horizontal Boring Mill
G&L Horiz. Boring Mill Model 70-D5-T New in 1966 5 Inch Spindle 122 X 72 Table 108 Inches of Cross Travel 120 Inches of Saddle Travel 96 Inches of Vertical Travel 50 Taper Spindle Heavy Wide Saddle Design $79,500.00
Contact us on this one



 
4 Inch
G&L Model 340T
Horizontal Boring Mill
G&L Horiz. Boring Mill Model 340T 4 Inch Diameter Spindle New in 1957 48 X 74 Table 60 Inches of Cross Travel 48 Inches of Vertical Travel 1300 Max Spindle RPMs Tail Stock 96 Inch Boring Bar $49,500.00
Contact us on this one



 
5 Inch
G&L Model PC5
Horizontal Boring Mill
G&L Horiz. Boring Mill Model PC-5 New 1974 5 Inch Diameter Spindle Heavy Duty-Triple V. Ways 48 X 122 Table 108 Inches of Cross Travel 48 Inches of Saddle Travel 78 Inches of Vert. Travel Power Draw Bar $79,500.00 in Plant
Contact us on this one



 
4 Inch
Wotan Model B105M
Horizontal Boring Mill
Wotan Horiz. Boring Mill Model B105M New 1972 4 Inch Spindle 55 X 55 Rotary Table 55 Inches of Cross Travel 39 Inches of Saddle Travel 39 Inches of Vert. Travel 50 Taper Spindle Threading Power Draw Bar $34,500.00
Contact us on this one



 
4 Inch
Tos Model W100A
Horizontal Boring Mill
Tos Horizontal Boring Mill Model W100A New in 1979 4 Inch Diameter Spindle 49 X 49 Rotary Table 63 Inches of Cross travel 60 Inches of Saddle Travel 44 Inches of Vertical Travel 23 Inch Dia. Facing Head Tail Stock $49,500.00
Contact us on this one



 
4 Inch
G&L Model T4
Horizontal Boring Mill
G&L Horiz. Boring Mill Model T4 New 1967 4 Inch Spindle 1300 RPM 48 X 96 Table 84 Inches of Cross Travel 48 Inches of Saddle Travel 60 Inches of Vertical Travel 50 Taper Spindle $59,500.00
Contact us on this one



 
5 Inch
G&L Model 70-D5-T
Horizontal Boring Mill
G&L Horiz. Boring Mill Model: 70-D5-T New 1966 5 Inch Spindle 72 X 158 Table 144 Inches of Cross Travel 36 Inches of Saddle Travel 96 Inches of Vertical Travel HD Wide Saddle Ways Hard Ways $99,500.00
Contact us on this one



 
5 Inch
G&L Model 350T
Horizontal Boring Mill
G&L Horiz. Boring Mill Model: 350T New 1960 5 Inch Spindle 120 X 60 Table 108 Inches of Cross Travel 48 Inches of Saddle Travel 72 Inches of Vertical Travel 50 Taper Spindle Power Draw Bar $79,500.00
Contact us on this one



 
5 Inch
Shibaura Model BFT
Horizontal Boring Mill
Shibaura Horiz. Boring Mill Model: BFT 5 Inch Spindle 98 X 47 Table 98 Inches of Cross Travel 48 Inches of Saddle Travel 71 Inches of Vertical Travel 25 HP Motor 1200 Spindle Max RPM Built-in Outriggers $79,500.00
Contact us on this one



 
3 Inch
G&L Model 300T
Horizontal Boring Mill
G&L Horiz. Boring Mill Model: 300T New 1951 3 Inch Spindle 1000 RPM 30 X 30 Rotary Table 38 Inches of Cross Travel 51 Inches Saddle Travel 42 Inches Vertical Travel Threading No. 4 Spindle Taper $49,500.00
Contact us on this one



 
4 Inch
Union Model BFT
Horizontal Boring Mill
4 Inch Union Boring Mill Model BFT-90 New in 1994 55 X 49 Rotary Table 63 Inches Cross Travel 58 Inches Saddle Travel 49 Inches Vertical Travel 90 Degree Mill Attachment Power Draw Bar Digital Read-Out $64.500.00 Loaded Out
Contact us on this one



 
4 Inch
G&L 65D4-T
Horizontal Boring Mill
4 Inch G&L 65D4-T Horizontal Boring Mill New 1963 96 X 48 T-Slotted Table 84 Inch Cross Travels 60 Inches Saddle Travel 60 Inches Vertical Travel No. 50 Spindle Taper Facing Head Tail Stock $79,500 Loaded Out
Contact us on this one



 
42 Inch
Tos W100A
Horizontal Boring Mill
4 Inch Tos Boring Mill Model W100A New 1997 49 X 49 Rotary Table 62 Inches Cross Travel 44 Inches Saddle Travel 62 Inches Vertical Travel No 50 Taper Facing Head Tail Stock $79,500.00 Loaded Out
Contact us on this one



 
5 Inch
G&L 70-D5-T
Horizontal Boring Mill
5 Inch G&L Boring Mill Model 70-D5-T New in 1974 96 X 48 Table 84 Inches Cross Travel 60 Inches Saddle Travel 72 Inches Vert. Travel No. 50 Spindle Taper Hard Ways $79,500.00 Loaded Out
Contact us on this one



 
3.25 Inch
Nomura B85BT2
Horizontal Boring Mill
3.25 Inch Nomura HBM Model B85BT2 New 1979 35 X 39 Rotary Table 40 Inch Cross Travel 32 Inch Saddle Travel 40 Inch Vertical Travel No. 50 Spindle Taper 21 to 1200 Spindle RPMs 3 Axis DRO $29,500 Loaded Out
Contact us on this one



 
4 Inch
Summit CNC/Manual
Horizontal Boring Mill
4 Inch Summit Boring Mill CNC & Manual Operation New 1995 48 X 60 Rotary Table 78 Inch Cross Travel 62 Inch Saddle Travel 66 Inch Vertical Travel No. 50 Spindle Taper 3 Axis DRO $79,500.00 Loaded Out
Contact us on this one



 
4 Inch
Supermill
Horizontal Boring Mill
4" Supermill Boring Mill New 1980 60 X 48 Rotary Table 80 Inch Cross Travel 50/66 Inch Saddle Travel 60 Inch Vertical Travel Tail stock (Not shown) Facing Head (Not shown) 3 Axis DRO Vertical Head Attachment $59,500.00 Loaded Out
Contact us on this one



 
5 Inch
G&L D5T
Horizontal Boring Mill
5 Inch G&L Boring Mill Model D5-T New in 1973 60 X 120 T-Slotted Table 108 Inches of Cross Travel 72 Inches of Saddle Travel 80 Inches of Vert. Travel No. 50 Spindle Taper Tail Stock $99,500.00 Loaded Out
Contact us on this one



 
4 Inch
Union BFT100
Horizontal Boring Mill
4 Inch Union Boring Mill Model BFT100 Late Model 59 X 52 Inch Rotary Table 72 Inches Cross Travel 66 Inches Saddle Travel 66 Inches Vertical Travel 27 Inch Dia. Facing Head Tail Stock Price Not Determined Yet
Contact us on this one



 
5 Inch
Wotan B130
Horizontal Boring Mill
5 Inch Wotan Boring Mill Model B130 New 1982 67 X 60 Rotary Table 56 Inches of Cross Travel 94 Inches of Saddle Travel 60 Inches of Vert. Travel No. 50 Spindle Taper 4 Axis Sony DRO $49,500.00
Contact us on this one



 
3 Inch
Wotan B75
Horizontal Boring Mill
3 Inch Wotan Boring Mill Model B75 4 Way Bed 39 X 32 Rotary Table 48 Inches of Cross Travel 32 Inches of Saddle Travel 36 Inches of Vert. Travel No. 40 spindle Taper Threading Built-in Outriggers $29,500.00 Loaded out
Contact us on this one



 
5 Inch
G&L 70-D5-T
Horizontal Boring Mill
5 Inch G&L Boring Mill Model 70 D5-T New 1971 120 X 60 Table 108 Inches Cross Travel 72 Inches of Saddle Travel 84 Inches of Vert. Travel No 50 Spindle Taper $99,500.00 Loaded Out
Contact us on this one



 
5.5 Inch Wotan
Horizontal Boring Mill
5.5 Inch Wotan Boring Mill 60 X 67 Rotary Table 85 Inches Cross Travel 36 Inches Longtudinal 60 Inches Vert.Travel No.50 Taper Inspect Under Power $49,500.00 Loaded Out
Contact us on this one



 
4 Inch
G&L 65-D4-T
Horizontal Boring Mill
4 Inch G&L Boring Mill Model: 65-D4-T New 1963 36 X 72 T-Slotted Table 60 Inch Cross Travel 60 Inch Saddle Travel 48 Inch Vertical Travel 10 to 1250 RPM Tailstock $59,500.00 Loaded Out
Contact us on this one

Subject to prior sale, contact us for those now available.
More listed below!

2 Inch Boring Mills (Horizontal)
 
2 Inch Tos Boring Mill (Horizontal)
Mod. Wh-63, Manual, 1980 Year, 35 x 31 Rotary
Table, 39" Cross Travl., 39" Long. Trav. 28" Vert.
Trav., No. 34 Taper, 1800 RPM, Tail Stock, DRO,
Good Condition, $19,500.
     
3 Inch Boring Mills (Horizontal)
 
3" G&L Boring Mill (Horizontal)
Mod. 330T, Manual, New in 1948, 36 X 96 Table, 84"
Cross Trav., 48" Vert. Trav., 1500 RPM, Tail Stock,
DRO, 15 HP, 220/440 Volt, III PH, Mill is in Very
Good Condition., $17,500.
     
3" Wotan Boring Mill (Horizontal)
Model B-90, Manual,1965 Yr., 43 X 49 Rot. Table,
54" Cross Travel, 38" Saddle Tr., 28" Spindle Tr., 49"
Vert. Tr., No. 5 Taper, 1600 RPM, DRO, Mill In Very
Good Condition, $19,500.
     
3" Tos Boring Mill (Horizontal)
Mod. W-75, Manual, 1988 Year, 36 x 36 Rotary
Table, 49" Cross Tr., 50" Saddle Tr., 24" Spnd.Tr., 35"
Vert. Tr., 40 Taper, 1800 RPM, Facing Head, In Very
Good Condition, $34,500.
     
4 Inch Boring Mills (Horizontal)
 
4" G&L Boring Mill (Horizontal)
Mod. 340T, Manual, New in 1952, 48 X 74 Table, 64"
Cross Trav., 72" Sadl. Trav., 36" Spindle Trav., 66"
Vert. Trav., NO. 5 Taper, 975 RPMs, Mill In Very
Nice Condition!, $39,500.
     
4" G&L Boring Mill (Horizontal)
Model 340T, Manual, 1954 Year, 48 X 122 Table,
108" Cross Tr., 88" Sdl. Tr., 66"Vert. Trav., No. 5
Taper, 1300 RPM, 20 HP, 22/440 Volt, Outriggers,
Really Nice, $59,500.
     
4" G&L Boring Mill (Horizontal)
Mod. 340T, Manual, New in 1954, 48 X 122 Table,
108" Cross Tr., 88" Saddle Tr., 66" Vert. Tr., No. 5
Tapr., 1300 RPM, 220/440 Volt, Outriggers, Really
Nice Condition, $79,500.
     
4" G&L Boring Mill (Horizontal)
Mod. 340-T, Manual, New in 1955, 48 X 86 Table,
64" Cross Travel, 72" Long. Travl., 60"Vert. Trav.,
27" Spindl. Travel, #50 Taper, 1300 RPMs, DRO,
Real Nice, $49,500.
     
4" Lucas Boring Mill (Horizontal)
Mod. 42B-60, Manual, 1955 Year, 40 X 74 Table, 60"
Cross Trav., 72" Saddle Trav. or 48 with a TS, 48"
Vert. Tr., #5MT Spndl.Taper, 1200 RPMs, Tail Stock,
Very Nice, $39,500.
     
4" G&L Boring Mill (Horizontal)
Mod. 65-D4-T, Manual, 1962 Year, 36 X 72 Table,
60" Cross Travel, 48" Long. Trav., 36" Vert. Trav.,
#50 Taper, 1300 RPMs, 24" Facing Hd., 20 HP, In
Good Condition, $49,500.
     
4" G&L Boring Mill (Horizontal)
Mod. 442B-72, Manual, 1964 Year, 42 x 74 Table, 60"
Cross Travel, 72" Saddle Trav, 48" Vert. Trav., #50
Taper, 1500 RPMs, Hardened Ways, Mill in very
Good Condition, $49,500.
     
4" G&L Boring Mill (Horizontal)
Mod. T-4, Manual, 1965 Yr., 72 X 36 Rotary Table,
60" Cross Travel, 48" Long. Trav., 44" Vert. Travl.,
#5MT Spndl. Taper, 1300 Spind. RPMs, Mill in very
Good Condition, $39,500.
     
4" G&L Boring Mill (Horizontal)
Mod. 65-E4-T, CNC, New in 1965, Retrofit 1998, 48
X 98 Table, 60" X Travel, 54" of Y, 50" Vert. Trav.,
24" W, No. 50 Taper, 6000 RPM, Fanuc 16, Reman.
'97, Very Nice, $119,500.
     
4" Wotan Boring Mill (Horizontal)
Mod. B-100-S, Manual, 1966 Year., 43 X 55 Table,
64" Cross Trav., 62" Long. Trav. 48" Vert.Tr., #50
Tpr., 1600 RPM, 43 X 55 Rotary Table, DRO, Mill in
Nice Condition, $49,500.
     
4" G&L Boring Mill (Horizontal)
Mod. 70-D4-T, Manual, 1966 Year, 48 x 74 Table, 60"
Cross Travel,48" Long. Travel, 60" Vert. Trav., 30"
Spindle Trav., No. 50 Taper, 1300 RPM, DRO, In
Good Condition, $49,500.
     
4" G&L Boring Mill (Horizontal)
Mod. 70-E4-T, Manual, 1968 Year, 48 X 86 Table,
87" Cross Travels, 80" Long.Travl. 50" Vert. Travl.,
38" Spindle Tr., #50 Tpr., 1320 RPMs, Facing Hd.,
Good condition, $69,500.
     
4" G&L Boring Mill (Horizontal)
Mod. PMC-4, Manual, 1969 Year, 48 X 96 Table, 84"
Cross Trav., 60" Long., Trav., 48" Vert. Trav., #50
Tpr., 1320 RPM, 3 Axis DRO, Threadg., Mill in very
Good Condition, $59,500.
     
4" G&L Boring Mill (Horizontal)
Mod. DP4-T, Manual, 1970 Year, 48 X 96 Table, 75"
Cross Travl., 59" Long. Trav., 52" Vertical Tr. No. 50
Taper, 1300 Spindle RPMs, DRO, Mill is in Very
Good Condition, $59,500.
     
4" Tos Boring Mill (Horizontal)
Mod. W100, Manual, 1974 Yr., 49 X 49 Rot. Table,
63" Cross Travl., 49" Long.Travl. 44" Vert. Trav., 35"
Spndl. Tr., #50 Taper, Facing Hd., DRO, Mill is in
very Good Condition, $49,500.
     
4" Cinn. Gilbert Boring Mill (Horizontal)
Model CT, Manual, New in 1979, 48 X 72 Table, 60"
Cross Travels, 48" Long. Travels, 48" Vert. Tr., 30"
Spndl. Trav., No. 50 Taper, 1715 RPMs, Gov.,
Excellent Condition, $69,500.
     
4" Tos Boring Mill (Horizontal)
Mod. W100A, Manual, 1980 Yr., 49 X 49, Rotary
Table, 63" Cross Tr., 49" Long.Trav., 44" Vert. Tr.,
No. 50 Tapr., 1120 RPM, Facing Head, 90 Degree
Head, DRO, Nice, $49,500.
     
4" Wotan Boring Mill (Horizontal)
Mod. B105S, Manual, 1980 Yr., 43 X 55, Rotary
Table, 72" Cross Tr., 48" Long., Tr. 49" Vert. Tr., #50
Spndl. Tapr., 1,000 RPMs, DRO, A Beautiful Boring
Mill, $49,500.
     
4" Wotan Boring Mill (Horizontal)
Mod. B105-5, Manual, 1981 Yr., 43 X 55 Rotary
Table, 72" Cross Tr., 60" Long. Trav., 49" Vert. Tr.,
60" Spindle Tr., No. 50 Taper, 1000 RPMs, In Very
Good Condition, $39,500.
     
4" Union Boring Mill (Horizontal)
Mod. BFT-100, Manual, 1981 Yr., 51 X 58 Rotary
Tbl., 86" Cross Tr., 36" Long. Trav., 58" Vert. Tr., 42"
Spindle Tr., No. 6 MT Taper, 600 RPM, Mill is in very
Good Condition, $49,500.
     
4" Union Boring Mill (Horizontal)
Mod. BFT105, CNC, 1989 Yr., 48 X 54 Rot. Tbl., 69"
Cross Trav., 26" Long. Trav., 49" Vert. Travl., 32"
Spindle Trav., #50 Taper, 2500 RPMs, Mill is in very
good Condition, $129,500.
     
5 Inch Boring Mills (Horizontal)
 
5" G&L Boring Mill (Horizontal)
Mod. 350T, Manual, New in 1950, 60 X 96 Table, 84"
Cross Travels, 96" Long Trav., 72" Vert. Trav., No. 5
Taper, 2000 RPM, Tail Stock, DRO, Mill is in Very
Good Condition, $27,500.
     
5" G&L Boring Mill (Horizontal)
Mod. 350T, Manual, New in 1951, 84 X 48 Table, 72"
Cross Travels, 84" Long. Travel, 66" Vert. Tr., 36"
Spindle Travel, No. 5 Spindle Taper, 975 RPM, Very
Good Condition, $29,500.
     
5" Lucas Boring Mill (Horizontal)
Mod. 542B-60, Manual, 1955 Year, 48 x 72 Table, 72"
Cross Travel, 72" Long. Trav., 48" Vert. Trav., 34"
Spindle Trav., No. 50 NST Taper, 1200 RPM, DRO,
Good Condition, $29,500.
     
5" G&L Boring Mill (Horizontal)
Mod. 350T, Manual, New in 1956, 96 X 60 Table,
108" Cross Trav., 120" Long. Trav., 72" Vert. Tr., No.
5 Taper, 975 RPM, Tail Stock, Hard Ways, A very
Nice Mill, $49,500.
     
5" G&L Boring Mill (Horizontal)
Mod. 65-D5-T Manual, 1960 Year, 48 x 98 Table, 84"
Cross Trav., 66" Long. Trav., 72" Vert. Trav., 30"
Spndl. Tr., #50 Spindle Taper, 975 RPM, DRO, Very
Nice, $59.500.
     
5" Lucas Boring Mill (Horizontal)
Mod. 542B-4, Manual, 1961 Year, 48 X 86 Table, 84"
Cross Trav., 41" Long. Travl., 60" Vert. Trav., 36"
Spndl. Tr., #50 Taper, 1200 RPM, DRO, Mill is in
Very Good Condition, $49,500.
     
5" G&L Boring Mill (Horizontal)
Mod. 70A-DP5-T, Manual, 1961 Year., 60 X 144 Tbl.,
132" Cross Tr., 90" Long. Tr., 60" Vert. Trav., 36"
Spndl. Tr., 50 Taper, 975 RPMs, Rebuilt 1993, Mill is
Nice $139,500.
     
5" G&L Boring Mill (Horizontal)
Mod. 65D5T, Manual, 1963 Year, 60 X 120 Table,
108" Cross Trav., 72" Long. Trav., 72" Vert. Trav.,
#50 Tpr., 975 RPMs, DRO, Hardened Ways, Very
Nice Condition, $79,500.
     
5" Lucas Boring Mill (Horizontal)
Mod. 542B-120, Manual, New in 1967, 56 X 110
Table, 96" Cross Trav., 100" Long. Tr., 72" Vert.
Travl., 36" Spindle Tr., #50 Taper, 1200 RPM, In
Good Condition, $79,500.
     
5" G&L Boring Mill (Horizontal)
Model 70A-DP5-T, Manual, New in1967, 48 X 98
Table, 82" Cross Trav., 64" Long. Trav., 48" Vert.
Trav., #50 Tpr., 975 RPMs, Saddle Out-riggers, In
Good Condition, $69,500.
     
5" Lucas Boring Mill (Horizontal)
Mod. 542B-120, Manual, New in 1969, 48 X 122
Table, 120" Cross Tr., 70" Long. Tr., 96" Vert. Tr.,
36" Spindle Travl., #50 Taper, 1200 RPMs, DRO,
Excellent, $89,500.
     
5" Lucas Boring Mill (Horizontal)
Mod. 42B-4218, Manual, 1970, 48 X 122 4-Way Bed,
120" Cross Trav., 70" Long. Trav., 96" Vert. Tr., 36"
Spndl. Tr., #50 Tapr., 1220 RPMs, Threads, DRO, In
Nice Condition, $79,500.
     
5" G&L Boring Mill (Horizontal)
Mod. PMC-5, Manual, New in 1970, 60 X 96 Table,
84" Cross Travel, 72" Long. Trav., 84" Vert. Trav.,
36" Spindle Trav., No. 50 Taper, 1120 RPMs, Very
Good Condition, $79,900.
     
5" Lucas Boring Mill (Horizontal)
Mod. 542B-120, Manual, New in 1970, 48 X 122
Table, 108" Cross Trav., 72" Long. Tr., 84" Vert.
Travel, No. 50 Taper, 1200 RPM, DRO, Add-On
Rotary, Very Nice, $84,500.
     
5" Lucas Boring Mill (Horizontal)
Mod. 542B-120, Manual, New in 1971, 48 X 122
Table, 108" Cross Trav., 72" Long. Trav., 84" Vert.
Travel, 50 Taper Spindle, 1200 RPMs, DRO, Very
Good Condition, $79,500.
     
5" Lucas Boring Mill (Horizontal)
Mod. 30B-65, Manual, 1974 Year, 60 X 86 Rotary
Table, 84" Cross Travel, 48" Long. Trav., 60" Vert.
Trav., 36" Spindle Trav., No. 50 Taper, 1200 RPM,
Good Condition, $69,500.
     
5" Wotan Boring Mill (Horizontal)
Mod. B130-S, Manual, 1975 Year, 60 X 67 Rotary
Table, 100" Cross Tr, 72" Long.Tr., 84" Vert. Trav.,
60" Spindle Trav., #50 Taper, 1250 RPM, In Very
Good Condition, $74,500.
     
5" Lucas Boring Mill (Horizontal)
Mod. 30B-65, Manual, New in 1975, 60 X 86 Table,
84" Cross Trav., 48" Long. Trav., 60" Vert. Trav., 36"
Spindle Trav., 50 Taper Spindle, 1200 RPMs, Mill in
Good Condition, $69,500.
     
5" G&L Boring Mill (Horizontal)
Mod. A130-5, Manual, 1977 Year, 60 X 120 Table,
108" Cross Travel, 78" Long. Travel, 94" Vert. Trav.,
36" Spnd. Travel, 50 Taper Spindle, 1200 RPM, Mill
in Nice Condition, $89,500.
     
5" G&L Boring Mill (Horizontal)
Mod. H5-T, Manual, 1978 Yr., 72 X 122 Table, 108"
Cross Travel, 72" Long. Travel, 96" Vert. Travel, 36"
Spindle Travel, No. 50 Taper, 1200 RPMs, In
Excellent Condition, $124,500.
     
5" G&L Fraz. Boring Mill (Horizontal)
Mod. 80DP-5T, Manual, 1979 Yr., 60 X 120 Table,
108" Cross Trav., 72" Long. Tr., 84" Vert. Travel, 36"
Spindle Travel, No. 50 Taper, 975 RPM, Mill in very
Good Condition, $79,500.
     
5" Lucus Boring Mill (Horizontal)
Mod. 30DC, Manual, 1980 Year, 60 x 122 Table, 96"
Cross Trav., 72" Long. Travel, 122" Vert. Travel, 36'
Spindle Travel, #50 Taper, 1200 RPM, DROs,
Tap/Thread/Drill, Nice, $69,500.
     
5" Tos Boring Mill (Horizontal)
Mod. WHN-138A, Manual, 1981, 63 X 70 Rotary
Tabl., 138" Cross Tr., 49" Long. Tr., 79" Vert. Trav.,
31" Spnd. Trav., 50 Taper Spind., Facing Head , 90
Deg. Head, Nice, $125,000.
     
6 Inch Boring Mills (Horizontal)
 
6" G&L Boring Mill (Horizontal)
Mod. 70H6T, Manual, 1964 Year, 72 X 144 Table,
132" Cross Travel, 108" Long. Travel, 120" Vert.
Trav.,48" Spndl. Tr., 50 Taper Spindle, 1020 RPM,
Nice Condition, $129,500.
     
6" G&L Boring Mill (Horizontal)
Mod. 65H6T, Manual, 1965 Year, 60 X 144 Table,
132" Cross Trav., 57" Long. Trav., 84" Vert. Trav.,
36" Spndl. Tr., No. 50 Taper Spindle, 1020 RPMs,
Very Nice Condition, $149,500.
     
6" G&L Boring Mill (Horizontal)
70-H6-T, Manual, New 1968, 75 X 170 Table, 166"
Cross Trav., 84" Long. Trav., 108" Vert. Tr., 48"
Spindle Tr., No. 50 Taper, 1020 RPMs, DRO,
Excellent Condition, $249,500.
     
6" Lucus Boring Mill (Horizontal)
Mod.642B-120, Manual, 1971 Yr., 60 X 120 Table,
108" Cross Tr.,156" Long. Tr., 110" Vert. Trav., 36"
Spindle Travel, No. 50 Taper, 1200 RPMs, Mill in
Good Condition, $165,000.
     
6" G&L Boring Mill (Horizontal)
Mod. 75-H6-T, Manual, 1974 Yr., 60 X 120 Table,
108" Cross Trav., 65" Long. Trav., 96" Vert. Trav.,
36" Spindle Trav., No 50 Taper, 1020 RPMs, Very
Good Condition, $135,000.
     
6" G&L Boring Mill (Horizontal)
Mod. 70-H6-T, Manual, New 1978, 72 X 168 Table,
156" Cross Trav., 144" Long. Trav., 120" Vert. Tr.,
48" Spndl. Trav., No 50 Traper, 1020 RPMs, DRO,
Excellent Condition, $179,500.
     
6" G&L Boring Mill (Horizontal)
Mod. H6-T Manual, New in 1979, 72 X 168 Table,
156" Cross Travel, 66" Long. Travel, 84" Vert. Trav.,
36" Spndl. Tr., No. 50 Taper, 1200 RPMs, DRO, In
Good Condition, $149,500.
     
6" Toshiba Boring Mill (Horizontal)
Mod. BP-150-R22, CNC 5 Axis, 2000 Yr., 86 X 70
Rot. Table, 140” Cross. Tr., 60" Lng. Tr., 90" Vert.
Tr., 28" Spndl. Tr., 50 Taper, 2500 RPMs, Helical
Interp., Nice, $545,500.
     
6" G&L Boring Mill (Horizontal)
Mod. PMC-50, CNC 4 Axis Retrofit '07, 73 X 48 Rot.,
60" Cross Travel, 54" Long. Travel, 78" Vert. Trav.,
36" Spindle Trav., No. 50 Taper, 1120 RPM, In
Excellent Condition, $189,500.
     
Contact Us Now
History of the horizontal boring mills: Horizontal boring mills in primitive forms were built back in the early 1800s, mostly for the boring of large gun barrels. An inventor named Wilkinson invented and developed a "boring machine" which then allowed James Watts to produce steam engines on a mass basis in the 18th Century in England. Over the centuries, boring mills have developed to not only do boring but also drilling, milling, reaming, facing, tapping & threading. Today, they're one of the most popular machine tools in use.

How horizontal boring mills are used: Horizontal boring mills, especially table type mills, are found in machining facilities of all sizes, from smaller one or two man machine shops, up to the very largest of all manufacturing plants. Most machining facilities that do boring and/or any of the above mentioned type of operations where rigidity's required, are sure to have one or more horizontal boring mills. A large number of horizontal boring mills are used in the oil industry and in the heavy construction equipment industries. The military and defense industries use many boring mills. In any industry where large metal components need boring, you'll see horizontal boring mills used.

Brands of Horizontal Boring Mills: Boring mills, were and still are, manufactured by a large variety of domestic and foreign manufacturers. Most popular by far and one of the oldest, being Giddings and Lewis, which is a domestic manufacturer and they're still, in business today. Another very popular brand of boring mill is Lucus. Also, there are: Wotan, Tos, Cincinnati Gilbert, Union, Kuraki, Toshiba, Sacem, Scharmann, Super Mill and others. So there are now many brands of boring mills available, for those looking for a used, reconditioned or rebuilt horizontal boring mill.

Horizontal Boring Mill Sizes: Most boring mills are one of six popular sizes, those being two, three, four, five, six or eight inch mills; size being determined by the diameter of the spindle that does all the work. For sure, four and five inch boring mills are the very most popular; they're large enough to do almost all the jobs that hit the average shop and yet, small enough to fit into the spaces normally available.

Small two and three inch boring mills are fine for the boring and machining of smaller parts that don't weigh a great deal. Large six or eight inch machines are often required for the machining of large heavy weight parts like those coming from the mining and/or construction industries and also the railroad industry.


Horizontal boring mill specifications: Boring mills can be ordered from the manufacturer with a variety of specifications. Boring mills can be built with several different table sizes which may or may not be a rotary type. Likewise, any one spindle size machine can also be ordered with a variety of cross, longitudinal/saddle and vertical travels. Some boring mills are bought with No. 7 spindle taper, others with 40 or 50 taper spindle; with No. 50 being the most popular since it provides the greatest amount of strength and rigidity. Machine operations that often need to do facing, can specify a facing head as an option on a horizontal boring mills. A tailstock is often ordered when line boring of longer parts require support at the outer end of the parts. Not all boring mills produced are equipped to do tapping and threading but some are and they're equipped with clutch controls required for such.

If you're in need of a horizontal boring mill, you will just need to decide what spindle size and taper will be best for your jobs and/or present tooling, the size table needed and whether or not it needs to be rotary type. If you're boring and/or facing things at both ends or on more than one side, a rotary table can save you a lot of time and money. We will need to know how long the cross, saddle and vertical travels need to be, whether or not you will need a facing head or tailstock and how much room you have for a horizontal boring mill.

We want to sell you a horizontal boring mill. I do look forward to communicating with you so we can provide the best possible horizontal boring mill.
Tom Hale
Contact Us Now
MenuBar Spacer

Copyright© 1981-2019 Tom Hale, All Rights Reserved
Site by: Gulfwebs.com


 
Horizontal boring mills since 1981, big selection!