Horizontal Boring Mills

Horizontal Boring Mills Used
Horizontal Boring Mills Reconditioned

Machines featured below are not the only ones available. Scroll on down!

4 Inch Wotan Model B100S Horizontal Boring Mill4 Inch
Wotan Model B100S
Horizontal Boring Mill
Wotan Horiz. Boring Mill
Model B100S
New 1975
4 Inch Spindle
55 X 43 Rotary Table
59 Inches of Cross Travel
49 Inches of Vertical Travel
50 Taper Spindle
1600 Max RPMs
Some Tooling
$49,500.00
Contact Us
3 Inch Wotan Model B75 Horizontal Boring Mill3 Inch
Wotan Model B75
Horizontal Boring Mill
Wotan Horiz. Boring Mill
Model B75
3 Inch Spindle
39 X 31 Rotary Table
45 Inches of Cross Travel
45 Inches of Saddle Travel
48 Inches of Vertical Travel
Built In Out Riggers
Threading
$29,500.00
Contact Us
4 Inch Wotan Model B105S Horizontal Boring Mill4 Inch
Wotan Model B105S
Horizontal Boring Mill
Wotan Horiz. Boring Mill
Model B105S
New in 1975
4 Inch Spindle
55 X 43 Rotary Table
72 Inches of Cross Travel
49 Inches of Vertical Travel
1000 Max RPMs
50 Taper Spindle
3 Axis Digital Read Out
$49,500.00
Contact Us
5 Inch G&L Model 350T Horizontal Boring Mill5 Inch
G&L Model 350T
Horizontal Boring Mill
G&L Horiz. Boring Mill
Model 350T
5 Inch Diameter Spindle
96 X 48 Table
84 Inches of Cross Travel
60 Inches of Vertical Travel
375 Main Spindle RPMs
1500 Aux. Spindle RPMs
230/460 Volt electrics
$49,500.00
Contact Us
6 Inch G&L Model 65-H6-T Horizontal Boring Mill6 Inch
G&L Model 65-H6-T
Horizontal Boring Mill
G&L Horiz. Boring Mill
Model 65-H6-T
New 1963
6 Inch Spindle
60 X 122 Table
108 Inches of Cross travel
66 Inches of Saddle Travel
72 Inches of Vertical Travel
50 Taper Spindle
Three Way Column Design
$129,500.00
Contact Us
4 Inch G&L Model 65-D4-T Horizontal Boring Mill4 Inch
G&L Model 65-D4-T
Horizontal Boring Mill
G&L Horiz. Boring Mill
Model 65-D4-T
New 1964
4 Inch Diameter Spindle
48 X 96 Table
84 Inches of Cross Travel
60 Inches of Vertical Travel
1300 Max Spindle RPMs
Hardened Ways
$59,500.00
Contact Us
5 Inch G&L Model 70A-D5-T Horizontal Boring Mill5 Inch
G&L Model 70A-D5-T
Horizontal Boring Mill
G&L Horiz. Boring Mill
Model 70A-D5-T
New in 1965
5 Inch Spindle
134 X 60 Table
120 Inches of Cross Travel
48 Inches of Saddle Travel
72 Inches of Vertical Travel
50 Taper Spindle
Power Draw
$99,500.00
Contact Us
4 Inch G&L Model 340T Horizontal Boring Mill4 Inch
G&L Model 340T
Horizontal Boring Mill
G&L Horiz. Boring Mill
Model 340T
New in 1956
4 Inch Spindle
36 X 74 Table
60 Inches of Cross Travel
54 Inches of saddle Travel
48 Inches of vertical Travel
50 Taper 1800 RPM Spindle
Hardened Ways
$49,500.00 Loaded
Contact Us
4 Inch G&L Model 340T Horizontal Boring Mill4 Inch
G&L Model 340T
Horizontal Boring Mill
G&L Horiz. Boring Mill
Model 340T
New 1954
4 Inch Spindle
74 X 36 Table
60 Inches of Cross Travel
48 Inches of Saddle Travel
60 Inches of Vertical Travel
1300 RPM Spindle
Threading
Tail Stock
$39,500.00
Contact Us
5 Inch G&L Model 70-D5-T Horizontal Boring Mill5 Inch
G&L Model 70-D5-T
Horizontal Boring Mill
G&L Horiz. Boring Mill
Model 70-D5-T
New in 1966
5 Inch Spindle
122 X 72 Table
108 Inches of Cross Travel
120 Inches of Saddle Travel
96 Inches of Vertical Travel
50 Taper Spindle
Heavy Wide Saddle Design
$79,500.00
Contact Us
4 Inch G&L Model 340T Horizontal Boring Mill4 Inch
G&L Model 340T
Horizontal Boring Mill
G&L Horiz. Boring Mill
Model 340T
4 Inch Diameter Spindle
New in 1957
48 X 74 Table
60 Inches of Cross Travel
48 Inches of Vertical Travel
1300 Max Spindle RPMs
Tail Stock
96 Inch Boring Bar
$49,500.00
Contact Us
5 Inch G&L Model PC5 Horizontal Boring Mill5 Inch
G&L Model PC5
Horizontal Boring Mill
G&L Horiz. Boring Mill
Model PC-5
New 1974
5 Inch Diameter Spindle
Heavy Duty-Triple V. Ways
48 X 122 Table
108 Inches of Cross Travel
48 Inches of Saddle Travel
78 Inches of Vert. Travel
Power Draw Bar
$79,500.00 in Plant
Contact Us
4 Inch Wotan Model B105M Horizontal Boring Mill4 Inch
Wotan Model B105M
Horizontal Boring Mill
Wotan Horiz. Boring Mill
Model B105M
New 1972
4 Inch Spindle
55 X 55 Rotary Table
55 Inches of Cross Travel
39 Inches of Saddle Travel
39 Inches of Vert. Travel
50 Taper Spindle
Threading
Power Draw Bar
$34,500.00
Contact Us
4 Inch Tos Model W100A Horizontal Boring Mill4 Inch
Tos Model W100A
Horizontal Boring Mill
Tos Horizontal Boring Mill
Model W100A
New in 1979
4 Inch Diameter Spindle
49 X 49 Rotary Table
63 Inches of Cross travel
60 Inches of Saddle Travel
44 Inches of Vertical Travel
23 Inch Dia. Facing Head
Tail Stock
$49,500.00
Contact Us
4 Inch G&L Model T4 Horizontal Boring Mill4 Inch
G&L Model T4
Horizontal Boring Mill
G&L Horiz. Boring Mill
Model T4
New 1967
4 Inch Spindle 1300 RPM
48 X 96 Table
84 Inches of Cross Travel
48 Inches of Saddle Travel
60 Inches of Vertical Travel
50 Taper Spindle
$59,500.00
Contact Us
5 Inch G&L Model 70-D5-T Horizontal Boring Mill5 Inch
G&L Model 70-D5-T
Horizontal Boring Mill
G&L Horiz. Boring Mill
Model: 70-D5-T
New 1966
5 Inch Spindle
72 X 158 Table
144 Inches of Cross Travel
36 Inches of Saddle Travel
96 Inches of Vertical Travel
HD Wide Saddle Ways
Hard Ways
$99,500.00
Contact Us
5 Inch G&L Model 350T Horizontal Boring Mill5 Inch
G&L Model 350T
Horizontal Boring Mill
G&L Horiz. Boring Mill
Model: 350T
New 1960
5 Inch Spindle
120 X 60 Table
108 Inches of Cross Travel
48 Inches of Saddle Travel
72 Inches of Vertical Travel
50 Taper Spindle
Power Draw Bar
$79,500.00
Contact Us
 
3 Inch G&L Model 300T Horizontal Boring Mill3 Inch
G&L Model 300T
Horizontal Boring Mill
G&L Horiz. Boring Mill
Model: 300T
New 1951
3 Inch Spindle 1000 RPM
30 X 30 Rotary Table
38 Inches of Cross Travel
51 Inches Saddle Travel
42 Inches Vertical Travel
Threading
No. 4 Spindle Taper
$49,500.00
Contact Us
4 Inch Union Model BFT Horizontal Boring Mill4 Inch
Union Model BFT
Horizontal Boring Mill
4 Inch Union Boring Mill
Model BFT-90
New in 1994
55 X 49 Rotary Table
63 Inches Cross Travel
58 Inches Saddle Travel
49 Inches Vertical Travel
90 Degree Mill Attachment
Power Draw Bar
Digital Read-Out
$64.500.00 Loaded Out
Contact Us
4 Inch G&L 65D4-T Horizontal Boring Mill4 Inch
G&L 65D4-T
Horizontal Boring Mill
4 Inch G&L 65D4-T
Horizontal Boring Mill
New 1963
96 X 48 T-Slotted Table
84 Inch Cross Travels
60 Inches Saddle Travel
60 Inches Vertical Travel
No. 50 Spindle Taper
Facing Head
Tail Stock
$79,500 Loaded Out
Contact Us
5 Inch G&L 70-D5-T Horizontal Boring Mill5 Inch
G&L 70-D5-T
Horizontal Boring Mill
4 Inch Tos Boring Mill
Model W100A
New 1997
49 X 49 Rotary Table
62 Inches Cross Travel
44 Inches Saddle Travel
62 Inches Vertical Travel
No 50 Taper
Facing Head
Tail Stock
$79,500.00 Loaded Out
Contact Us
4 Inch Summit CNC/Manual Horizontal Boring Mill4 Inch
Summit CNC/Manual
Horizontal Boring Mill
4 Inch Summit Boring Mill
CNC & Manual Operation
New 1995
48 X 60 Rotary Table
78 Inch Cross Travel
62 Inch Saddle Travel
66 Inch Vertical Travel
No. 50 Spindle Taper
3 Axis DRO
$79,500.00 Loaded Out
Contact Us
5 Inch G&L D5T Horizontal Boring Mill5 Inch
G&L D5T
Horizontal Boring Mill
5 Inch G&L Boring Mill
Model D5-T
New in 1973
60 X 120 T-Slotted Table
108 Inches of Cross Travel
72 Inches of Saddle Travel
80 Inches of Vert. Travel
No. 50 Spindle Taper
Tail Stock
$99,500.00 Loaded Out
Contact Us
4 Inch Union BFT100 Horizontal Boring Mill4 Inch
Union BFT100
Horizontal Boring Mill
4 Inch Union Boring Mill
Model BFT100
Late Model
59 X 52 Inch Rotary Table
72 Inches Cross Travel
66 Inches Saddle Travel
66 Inches Vertical Travel
27 Inch Dia. Facing Head
Tail Stock
Price Not Determined Yet
Contact Us
5 Inch Wotan B130 Horizontal Boring Mill5 Inch
Wotan B130
Horizontal Boring Mill
5 Inch Wotan Boring Mill
Model B130
New 1982
67 X 60 Rotary Table
56 Inches of Cross Travel
94 Inches of Saddle Travel
60 Inches of Vert. Travel
No. 50 Spindle Taper
4 Axis Sony DRO
$49,500.00
Contact Us
3 Inch Wotan B75 Horizontal Boring Mill3 Inch
Wotan B75
Horizontal Boring Mill
3 Inch Wotan Boring Mill
Model B75
4 Way Bed
39 X 32 Rotary Table
48 Inches of Cross Travel
32 Inches of Saddle Travel
36 Inches of Vert. Travel
No. 40 spindle Taper
Threading
Built-in Outriggers
$29,500.00 Loaded out
Contact Us
5 Inch G&L 70-D5-T Horizontal Boring Mill5 Inch
G&L 70-D5-T
Horizontal Boring Mill
5 Inch G&L Boring Mill
Model 70 D5-T
New 1971
120 X 60 Table
108 Inches Cross Travel
72 Inches of Saddle Travel
84 Inches of Vert. Travel
No 50 Spindle Taper
$99,500.00 Loaded Out
Contact Us
5.5 Inch Wotan Horizontal Boring Mill5.5 Inch Wotan
Horizontal Boring Mill
5.5 Inch Wotan Boring Mill
60 X 67 Rotary Table
85 Inches Cross Travel
36 Inches Longtudinal
60 Inches Vert.Travel
No.50 Taper
Inspect Under Power
$49,500.00 Loaded Out
Contact Us
4 Inch G&L 65-D4-T Horizontal Boring Mill4 Inch
G&L 65-D4-T
Horizontal Boring Mill
4 Inch G&L Boring Mill
Model: 65-D4-T
New 1963
36 X 72 T-Slotted Table
60 Inch Cross Travel
60 Inch Saddle Travel
48 Inch Vertical Travel
10 to 1250 RPM
Tailstock
$59,500.00 Loaded Out
Contact Us

3 Inch
G&L 300-T
Horizontal Boring Mill

3 Inch G&L Boring Mill
Model: 300-T
New 1956
36 X 72 T-Slotted Table
36 X 36 Manual Rotary Table
60 Inch Cross Travel
58 Inch Saddle Travel
48 Inch Vertical Travel
No. 5 Taper
Built In Out-riggers $17,500.00 Loaded Out
Contact Us
 

 

Subject to prior sale, contact us for those now available.
More listed below!

2 Inch Boring Mills (Horizontal)

2 Inch Tos Boring Mill (Horizontal)
Mod. Wh-63, Manual, 1980 Year, 35 x 31 Rotary
Table, 39″ Cross Travl., 39″ Long. Trav. 28″ Vert.
Trav., No. 34 Taper, 1800 RPM, Tail Stock, DRO,
Good Condition, $19,500.

3 Inch Boring Mills (Horizontal)

3″ G&L Boring Mill (Horizontal)
Mod. 330T, Manual, New in 1948, 36 X 96 Table, 84″
Cross Trav., 48″ Vert. Trav., 1500 RPM, Tail Stock,
DRO, 15 HP, 220/440 Volt, III PH, Mill is in Very
Good Condition., $17,500.

3″ Wotan Boring Mill (Horizontal)
Model B-90, Manual,1965 Yr., 43 X 49 Rot. Table,
54″ Cross Travel, 38″ Saddle Tr., 28″ Spindle Tr., 49″
Vert. Tr., No. 5 Taper, 1600 RPM, DRO, Mill In Very
Good Condition, $19,500.

3″ Tos Boring Mill (Horizontal)
Mod. W-75, Manual, 1988 Year, 36 x 36 Rotary
Table, 49″ Cross Tr., 50″ Saddle Tr., 24″ Spnd.Tr., 35″
Vert. Tr., 40 Taper, 1800 RPM, Facing Head, In Very
Good Condition, $34,500.

4 Inch Boring Mills (Horizontal)

4″ G&L Boring Mill (Horizontal)
Mod. 340T, Manual, New in 1952, 48 X 74 Table, 64″
Cross Trav., 72″ Sadl. Trav., 36″ Spindle Trav., 66″
Vert. Trav., NO. 5 Taper, 975 RPMs, Mill In Very
Nice Condition!, $39,500.

4″ G&L Boring Mill (Horizontal)
Model 340T, Manual, 1954 Year, 48 X 122 Table,
108″ Cross Tr., 88″ Sdl. Tr., 66″Vert. Trav., No. 5
Taper, 1300 RPM, 20 HP, 22/440 Volt, Outriggers,
Really Nice, $59,500.

4″ G&L Boring Mill (Horizontal)
Mod. 340T, Manual, New in 1954, 48 X 122 Table,
108″ Cross Tr., 88″ Saddle Tr., 66″ Vert. Tr., No. 5
Tapr., 1300 RPM, 220/440 Volt, Outriggers, Really
Nice Condition, $79,500.

4″ G&L Boring Mill (Horizontal)
Mod. 340-T, Manual, New in 1955, 48 X 86 Table,
64″ Cross Travel, 72″ Long. Travl., 60″Vert. Trav.,
27″ Spindl. Travel, #50 Taper, 1300 RPMs, DRO,
Real Nice, $49,500.

4″ Lucas Boring Mill (Horizontal)
Mod. 42B-60, Manual, 1955 Year, 40 X 74 Table, 60″
Cross Trav., 72″ Saddle Trav. or 48 with a TS, 48″
Vert. Tr., #5MT Spndl.Taper, 1200 RPMs, Tail Stock,
Very Nice, $39,500.

4″ G&L Boring Mill (Horizontal)
Mod. 65-D4-T, Manual, 1962 Year, 36 X 72 Table,
60″ Cross Travel, 48″ Long. Trav., 36″ Vert. Trav.,
#50 Taper, 1300 RPMs, 24″ Facing Hd., 20 HP, In
Good Condition, $49,500.

4″ G&L Boring Mill (Horizontal)
Mod. 442B-72, Manual, 1964 Year, 42 x 74 Table, 60″
Cross Travel, 72″ Saddle Trav, 48″ Vert. Trav., #50
Taper, 1500 RPMs, Hardened Ways, Mill in very
Good Condition, $49,500.

4″ G&L Boring Mill (Horizontal)
Mod. T-4, Manual, 1965 Yr., 72 X 36 Rotary Table,
60″ Cross Travel, 48″ Long. Trav., 44″ Vert. Travl.,
#5MT Spndl. Taper, 1300 Spind. RPMs, Mill in very
Good Condition, $39,500.

4″ G&L Boring Mill (Horizontal)
Mod. 65-E4-T, CNC, New in 1965, Retrofit 1998, 48
X 98 Table, 60″ X Travel, 54″ of Y, 50″ Vert. Trav.,
24″ W, No. 50 Taper, 6000 RPM, Fanuc 16, Reman.
’97, Very Nice, $119,500.

4″ Wotan Boring Mill (Horizontal)
Mod. B-100-S, Manual, 1966 Year., 43 X 55 Table,
64″ Cross Trav., 62″ Long. Trav. 48″ Vert.Tr., #50
Tpr., 1600 RPM, 43 X 55 Rotary Table, DRO, Mill in
Nice Condition, $49,500.

4″ G&L Boring Mill (Horizontal)
Mod. 70-D4-T, Manual, 1966 Year, 48 x 74 Table, 60″
Cross Travel,48″ Long. Travel, 60″ Vert. Trav., 30″
Spindle Trav., No. 50 Taper, 1300 RPM, DRO, In
Good Condition, $49,500.

4″ G&L Boring Mill (Horizontal)
Mod. 70-E4-T, Manual, 1968 Year, 48 X 86 Table,
87″ Cross Travels, 80″ Long.Travl. 50″ Vert. Travl.,
38″ Spindle Tr., #50 Tpr., 1320 RPMs, Facing Hd.,
Good condition, $69,500.

4″ G&L Boring Mill (Horizontal)
Mod. PMC-4, Manual, 1969 Year, 48 X 96 Table, 84″
Cross Trav., 60″ Long., Trav., 48″ Vert. Trav., #50
Tpr., 1320 RPM, 3 Axis DRO, Threadg., Mill in very
Good Condition, $59,500.

4″ G&L Boring Mill (Horizontal)
Mod. DP4-T, Manual, 1970 Year, 48 X 96 Table, 75″
Cross Travl., 59″ Long. Trav., 52″ Vertical Tr. No. 50
Taper, 1300 Spindle RPMs, DRO, Mill is in Very
Good Condition, $59,500.

4″ Tos Boring Mill (Horizontal)
Mod. W100, Manual, 1974 Yr., 49 X 49 Rot. Table,
63″ Cross Travl., 49″ Long.Travl. 44″ Vert. Trav., 35″
Spndl. Tr., #50 Taper, Facing Hd., DRO, Mill is in
very Good Condition, $49,500.

4″ Cinn. Gilbert Boring Mill (Horizontal)
Model CT, Manual, New in 1979, 48 X 72 Table, 60″
Cross Travels, 48″ Long. Travels, 48″ Vert. Tr., 30″
Spndl. Trav., No. 50 Taper, 1715 RPMs, Gov.,
Excellent Condition, $69,500.

4″ Tos Boring Mill (Horizontal)
Mod. W100A, Manual, 1980 Yr., 49 X 49, Rotary
Table, 63″ Cross Tr., 49″ Long.Trav., 44″ Vert. Tr.,
No. 50 Tapr., 1120 RPM, Facing Head, 90 Degree
Head, DRO, Nice, $49,500.

4″ Wotan Boring Mill (Horizontal)
Mod. B105S, Manual, 1980 Yr., 43 X 55, Rotary
Table, 72″ Cross Tr., 48″ Long., Tr. 49″ Vert. Tr., #50
Spndl. Tapr., 1,000 RPMs, DRO, A Beautiful Boring
Mill, $49,500.

4″ Wotan Boring Mill (Horizontal)
Mod. B105-5, Manual, 1981 Yr., 43 X 55 Rotary
Table, 72″ Cross Tr., 60″ Long. Trav., 49″ Vert. Tr.,
60″ Spindle Tr., No. 50 Taper, 1000 RPMs, In Very
Good Condition, $39,500.

4″ Union Boring Mill (Horizontal)
Mod. BFT-100, Manual, 1981 Yr., 51 X 58 Rotary
Tbl., 86″ Cross Tr., 36″ Long. Trav., 58″ Vert. Tr., 42″
Spindle Tr., No. 6 MT Taper, 600 RPM, Mill is in very
Good Condition, $49,500.

4″ Union Boring Mill (Horizontal)
Mod. BFT105, CNC, 1989 Yr., 48 X 54 Rot. Tbl., 69″
Cross Trav., 26″ Long. Trav., 49″ Vert. Travl., 32″
Spindle Trav., #50 Taper, 2500 RPMs, Mill is in very
good Condition, $129,500.

5 Inch Boring Mills (Horizontal)

5″ G&L Boring Mill (Horizontal)
Mod. 350T, Manual, New in 1950, 60 X 96 Table, 84″
Cross Travels, 96″ Long Trav., 72″ Vert. Trav., No. 5
Taper, 2000 RPM, Tail Stock, DRO, Mill is in Very
Good Condition, $27,500.

5″ G&L Boring Mill (Horizontal)
Mod. 350T, Manual, New in 1951, 84 X 48 Table, 72″
Cross Travels, 84″ Long. Travel, 66″ Vert. Tr., 36″
Spindle Travel, No. 5 Spindle Taper, 975 RPM, Very
Good Condition, $29,500.

5″ Lucas Boring Mill (Horizontal)
Mod. 542B-60, Manual, 1955 Year, 48 x 72 Table, 72″
Cross Travel, 72″ Long. Trav., 48″ Vert. Trav., 34″
Spindle Trav., No. 50 NST Taper, 1200 RPM, DRO,
Good Condition, $29,500.

5″ G&L Boring Mill (Horizontal)
Mod. 350T, Manual, New in 1956, 96 X 60 Table,
108″ Cross Trav., 120″ Long. Trav., 72″ Vert. Tr., No.
5 Taper, 975 RPM, Tail Stock, Hard Ways, A very
Nice Mill, $49,500.

5″ G&L Boring Mill (Horizontal)
Mod. 65-D5-T Manual, 1960 Year, 48 x 98 Table, 84″
Cross Trav., 66″ Long. Trav., 72″ Vert. Trav., 30″
Spndl. Tr., #50 Spindle Taper, 975 RPM, DRO, Very
Nice, $59.500.

5″ Lucas Boring Mill (Horizontal)
Mod. 542B-4, Manual, 1961 Year, 48 X 86 Table, 84″
Cross Trav., 41″ Long. Travl., 60″ Vert. Trav., 36″
Spndl. Tr., #50 Taper, 1200 RPM, DRO, Mill is in
Very Good Condition, $49,500.

5″ G&L Boring Mill (Horizontal)
Mod. 70A-DP5-T, Manual, 1961 Year., 60 X 144 Tbl.,
132″ Cross Tr., 90″ Long. Tr., 60″ Vert. Trav., 36″
Spndl. Tr., 50 Taper, 975 RPMs, Rebuilt 1993, Mill is
Nice $139,500.

5″ G&L Boring Mill (Horizontal)
Mod. 65D5T, Manual, 1963 Year, 60 X 120 Table,
108″ Cross Trav., 72″ Long. Trav., 72″ Vert. Trav.,
#50 Tpr., 975 RPMs, DRO, Hardened Ways, Very
Nice Condition, $79,500.

5″ Lucas Boring Mill (Horizontal)
Mod. 542B-120, Manual, New in 1967, 56 X 110
Table, 96″ Cross Trav., 100″ Long. Tr., 72″ Vert.
Travl., 36″ Spindle Tr., #50 Taper, 1200 RPM, In
Good Condition, $79,500.

5″ G&L Boring Mill (Horizontal)
Model 70A-DP5-T, Manual, New in1967, 48 X 98
Table, 82″ Cross Trav., 64″ Long. Trav., 48″ Vert.
Trav., #50 Tpr., 975 RPMs, Saddle Out-riggers, In
Good Condition, $69,500.

5″ Lucas Boring Mill (Horizontal)
Mod. 542B-120, Manual, New in 1969, 48 X 122
Table, 120″ Cross Tr., 70″ Long. Tr., 96″ Vert. Tr.,
36″ Spindle Travl., #50 Taper, 1200 RPMs, DRO,
Excellent, $89,500.

5″ Lucas Boring Mill (Horizontal)
Mod. 42B-4218, Manual, 1970, 48 X 122 4-Way Bed,
120″ Cross Trav., 70″ Long. Trav., 96″ Vert. Tr., 36″
Spndl. Tr., #50 Tapr., 1220 RPMs, Threads, DRO, In
Nice Condition, $79,500.

5″ G&L Boring Mill (Horizontal)
Mod. PMC-5, Manual, New in 1970, 60 X 96 Table,
84″ Cross Travel, 72″ Long. Trav., 84″ Vert. Trav.,
36″ Spindle Trav., No. 50 Taper, 1120 RPMs, Very
Good Condition, $79,900.

5″ Lucas Boring Mill (Horizontal)
Mod. 542B-120, Manual, New in 1970, 48 X 122
Table, 108″ Cross Trav., 72″ Long. Tr., 84″ Vert.
Travel, No. 50 Taper, 1200 RPM, DRO, Add-On
Rotary, Very Nice, $84,500.

5″ Lucas Boring Mill (Horizontal)
Mod. 542B-120, Manual, New in 1971, 48 X 122
Table, 108″ Cross Trav., 72″ Long. Trav., 84″ Vert.
Travel, 50 Taper Spindle, 1200 RPMs, DRO, Very
Good Condition, $79,500.

5″ Lucas Boring Mill (Horizontal)
Mod. 30B-65, Manual, 1974 Year, 60 X 86 Rotary
Table, 84″ Cross Travel, 48″ Long. Trav., 60″ Vert.
Trav., 36″ Spindle Trav., No. 50 Taper, 1200 RPM,
Good Condition, $69,500.

5″ Wotan Boring Mill (Horizontal)
Mod. B130-S, Manual, 1975 Year, 60 X 67 Rotary
Table, 100″ Cross Tr, 72″ Long.Tr., 84″ Vert. Trav.,
60″ Spindle Trav., #50 Taper, 1250 RPM, In Very
Good Condition, $74,500.

5″ Lucas Boring Mill (Horizontal)
Mod. 30B-65, Manual, New in 1975, 60 X 86 Table,
84″ Cross Trav., 48″ Long. Trav., 60″ Vert. Trav., 36″
Spindle Trav., 50 Taper Spindle, 1200 RPMs, Mill in
Good Condition, $69,500.

5″ G&L Boring Mill (Horizontal)
Mod. A130-5, Manual, 1977 Year, 60 X 120 Table,
108″ Cross Travel, 78″ Long. Travel, 94″ Vert. Trav.,
36″ Spnd. Travel, 50 Taper Spindle, 1200 RPM, Mill
in Nice Condition, $89,500.

5″ G&L Boring Mill (Horizontal)
Mod. H5-T, Manual, 1978 Yr., 72 X 122 Table, 108″
Cross Travel, 72″ Long. Travel, 96″ Vert. Travel, 36″
Spindle Travel, No. 50 Taper, 1200 RPMs, In
Excellent Condition, $124,500.

5″ G&L Fraz. Boring Mill (Horizontal)
Mod. 80DP-5T, Manual, 1979 Yr., 60 X 120 Table,
108″ Cross Trav., 72″ Long. Tr., 84″ Vert. Travel, 36″
Spindle Travel, No. 50 Taper, 975 RPM, Mill in very
Good Condition, $79,500.

5″ Lucus Boring Mill (Horizontal)
Mod. 30DC, Manual, 1980 Year, 60 x 122 Table, 96″
Cross Trav., 72″ Long. Travel, 122″ Vert. Travel, 36′
Spindle Travel, #50 Taper, 1200 RPM, DROs,
Tap/Thread/Drill, Nice, $69,500.

5″ Tos Boring Mill (Horizontal)
Mod. WHN-138A, Manual, 1981, 63 X 70 Rotary
Tabl., 138″ Cross Tr., 49″ Long. Tr., 79″ Vert. Trav.,
31″ Spnd. Trav., 50 Taper Spind., Facing Head , 90
Deg. Head, Nice, $125,000.

6 Inch Boring Mills (Horizontal)

6″ G&L Boring Mill (Horizontal)
Mod. 70H6T, Manual, 1964 Year, 72 X 144 Table,
132″ Cross Travel, 108″ Long. Travel, 120″ Vert.
Trav.,48″ Spndl. Tr., 50 Taper Spindle, 1020 RPM,
Nice Condition, $129,500.

6″ G&L Boring Mill (Horizontal)
Mod. 65H6T, Manual, 1965 Year, 60 X 144 Table,
132″ Cross Trav., 57″ Long. Trav., 84″ Vert. Trav.,
36″ Spndl. Tr., No. 50 Taper Spindle, 1020 RPMs,
Very Nice Condition, $149,500.

6″ G&L Boring Mill (Horizontal)
70-H6-T, Manual, New 1968, 75 X 170 Table, 166″
Cross Trav., 84″ Long. Trav., 108″ Vert. Tr., 48″
Spindle Tr., No. 50 Taper, 1020 RPMs, DRO,
Excellent Condition, $249,500.

6″ Lucus Boring Mill (Horizontal)
Mod.642B-120, Manual, 1971 Yr., 60 X 120 Table,
108″ Cross Tr.,156″ Long. Tr., 110″ Vert. Trav., 36″
Spindle Travel, No. 50 Taper, 1200 RPMs, Mill in
Good Condition, $165,000.

6″ G&L Boring Mill (Horizontal)
Mod. 75-H6-T, Manual, 1974 Yr., 60 X 120 Table,
108″ Cross Trav., 65″ Long. Trav., 96″ Vert. Trav.,
36″ Spindle Trav., No 50 Taper, 1020 RPMs, Very
Good Condition, $135,000.

6″ G&L Boring Mill (Horizontal)
Mod. 70-H6-T, Manual, New 1978, 72 X 168 Table,
156″ Cross Trav., 144″ Long. Trav., 120″ Vert. Tr.,
48″ Spndl. Trav., No 50 Traper, 1020 RPMs, DRO,
Excellent Condition, $179,500.

6″ G&L Boring Mill (Horizontal)
Mod. H6-T Manual, New in 1979, 72 X 168 Table,
156″ Cross Travel, 66″ Long. Travel, 84″ Vert. Trav.,
36″ Spndl. Tr., No. 50 Taper, 1200 RPMs, DRO, In
Good Condition, $149,500.

6″ Toshiba Boring Mill (Horizontal)
Mod. BP-150-R22, CNC 5 Axis, 2000 Yr., 86 X 70
Rot. Table, 140” Cross. Tr., 60″ Lng. Tr., 90″ Vert.
Tr., 28″ Spndl. Tr., 50 Taper, 2500 RPMs, Helical
Interp., Nice, $545,500.

6″ G&L Boring Mill (Horizontal)
Mod. PMC-50, CNC 4 Axis Retrofit ’07, 73 X 48 Rot.,
60″ Cross Travel, 54″ Long. Travel, 78″ Vert. Trav.,
36″ Spindle Trav., No. 50 Taper, 1120 RPM, In
Excellent Condition, $189,500.

History of the horizontal boring mills:

Horizontal boring mills in primitive forms were built back in the early 1800s, mostly for the boring of large gun barrels. An inventor named Wilkinson invented and developed a “boring machine” which then allowed James Watts to produce steam engines on a mass basis in the 18th Century in England. Over the centuries, boring mills have developed to not only do boring but also drilling, milling, reaming, facing, tapping & threading. Today, they’re one of the most popular machine tools in use.

How horizontal boring mills are used:

Horizontal boring mills, especially table type mills, are found in machining facilities of all sizes, from smaller one or two man machine shops, up to the very largest of all manufacturing plants. Most machining facilities that do boring and/or any of the above mentioned type of operations where rigidity’s required, are sure to have one or more horizontal boring mills. A large number of horizontal boring mills are used in the oil industry and in the heavy construction equipment industries. The military and defense industries use many boring mills. In any industry where large metal components need boring, you’ll see horizontal boring mills used.

Brands of Horizontal Boring Mills:

Boring mills, were and still are, manufactured by a large variety of domestic and foreign manufacturers. Most popular by far and one of the oldest, being Giddings and Lewis, which is a domestic manufacturer and they’re still, in business today. Another very popular brand of boring mill is Lucus. Also, there are: Wotan, Tos, Cincinnati Gilbert, Union, Kuraki, Toshiba, Sacem, Scharmann, Super Mill and others. So there are now many brands of boring mills available, for those looking for a used, reconditioned or rebuilt horizontal boring mill.

Horizontal Boring Mill Sizes:

Most boring mills are one of six popular sizes, those being two, three, four, five, six or eight inch mills; size being determined by the diameter of the spindle that does all the work. For sure, four and five inch boring mills are the very most popular; they’re large enough to do almost all the jobs that hit the average shop and yet, small enough to fit into the spaces normally available.

Small two and three inch boring mills are fine for the boring and machining of smaller parts that don’t weigh a great deal. Large six or eight inch machines are often required for the machining of large heavy weight parts like those coming from the mining and/or construction industries and also the railroad industry.

Horizontal boring mill specifications: Boring mills can be ordered from the manufacturer with a variety of specifications. Boring mills can be built with several different table sizes which may or may not be a rotary type. Likewise, any one spindle size machine can also be ordered with a variety of cross, longitudinal/saddle and vertical travels. Some boring mills are bought with No. 7 spindle taper, others with 40 or 50 taper spindle; with No. 50 being the most popular since it provides the greatest amount of strength and rigidity.

Machine operations that often need to do facing, can specify a facing head as an option on a horizontal boring mills. A tailstock is often ordered when line boring of longer parts require support at the outer end of the parts. Not all boring mills produced are equipped to do tapping and threading but some are and they’re equipped with clutch controls required for such.

If you’re in need of a horizontal boring mill, you will just need to decide what spindle size and taper will be best for your jobs and/or present tooling, the size table needed and whether or not it needs to be rotary type. If you’re boring and/or facing things at both ends or on more than one side, a rotary table can save you a lot of time and money. We will need to know how long the cross, saddle and vertical travels need to be, whether or not you will need a facing head or tailstock and how much room you have for a horizontal boring mill.

We want to sell you a horizontal boring mill. I do look forward to communicating with you so we can provide the best possible horizontal boring mill.
We look forward to answering your needs of a reliable long lasting Blanchard rotary type surface grinder.Tom Hale Signature
A service of Tom Hale Equipment Company, Inc.